KV2 Audio SAC2 - Super Analog Controller for ESD and Passive Speaker Systems

Incorporating KV2 Audio's legendary VHD Line Drivers on each output, the SAC2 boasts the Clarity, Resolution and Very High Definition expected from KV2 Audio's Super Live Audio series of products. This combined with a four-band master EQ section, selectable High pass filter, switchable polarity, Subwoofer EQ enhancement circuit and a variable speed limiter make the SAC2 one of the finest sounding loudspeaker controllers on the market today.

• 2 input X 4 ouput Super Analog audio controller
• Designed for optimised performance with KV2 Audio's ESD loudspeakers, as well as other manufacturers passive or active loudspeakers
• Each channel features a switchable crossover with adjustable HPF / LPF and two independent notch filters, for left and right channels, to quickly and effectively reduce room resonances and feedback issues.
• 2-way stereo crossover for use with KV2 Audio's ESD loudspeakers or other manufacturers products.
• Room EQ for use with KV2 Audio's loudspeakers or other manufacturers products.
• High quality monitoring system EQ.
• Very High Quality Limiter feature for applications where a noise restriction applies.

Technical Specifications

• System Acoustic Perfomance
• -1dB Response 20Hz - 40kHz
  Dynamic Range >115dB
  Channel Crosstalk >60dB
  Total Harmonic Distortion <0.005%
• Output Channels
  Max. Output Voltage 14V / 7V (50Ω) RMS
  Max. Output Current 450mA
• Signal Input
  Input Channels 2
  Input Impedance 20kΩ
  Line input XLR
• Signal Output
  Output channels 4
  Output Impedance 50Ω
• Features
  Level Control -15 / +10dB
  System setup Crossover / Bypass
  Gain -10 / +10dB
  Phase 0° / 180°
  Crossover 70 / 120Hz, Butterworth 12dB/octave
  High Pass Filter 20 / 40Hz
  Equalization 4-band equalizer
  Notch Filter 2 per channel
  Loudness bass enhancement +6dB @ 60Hz
  Volume Limiter Fast/Slow / -15 + 10dB
  Indicators 4x LED bar graphs
• Power
  Power Connector IEC 320
  Operating Voltage Range 90-130V@60Hz | 180-260V@50Hz
• Physical Dimensions
  Height 44.5mm (1.75")
  Width 483mm (19.0")
  Depth 201mm (7.9")
  Weight 3.2kg (7.05lbs)

For further details and advice on the SAC2 Super Analog Controller or anything else, please ring us on 01204 397343