KV2 Audio - VHD2.0 Touring and Installation Mid/High 3-Way Active Speaker Stystem

Price: £7850.00

In stock: 10 | Product Code: KV386SP

KV2 Audio - VHD2.0 Touring and Installation Mid/High 3-Way Active Speaker Stystem

The VHD 2.0 is a three-way design featuring a 3”compression driver with NVPD treated dome assembly, two horn loaded 8” speakers featuring AIC technology and two horn loaded 12”mid-bass speakers. All speakers employ neodymium magnets to increase force, improve control and lower weight. Nominal dispersion for the VHD 2.0is 80� horizontal and 40� vertical. A Left and Right version of the speaker is offered in order to create larger format vertical arrays ofthe mid high system. When two VHD 2.0’s are arrayed vertically, horizontal dispersion is maintained while vertical dispersion is lowered to less than 10� forming a powerful long throw system for audiences of up to 20,000 people without additional delay systems. System response is 23Hz to 22kHz depending on the subwoofers selected.

Powerful long throw system for audiences of up to 20,000 people without additional delay systems
Three-way design featuring a 3”compression driver with NVPD treated dome assembly, two horn loaded 8” speakers featuring AIC technology and two horn loaded 12”mid-bass speakers
All speakers employ neodymium magnets to increase force, improve control and lower weight
80� horizontal and 40� (10� double system)�vertical dispersion�
A Left and Right version of the speaker is offered in order to create larger format vertical arrays of the mid high system

Features

Professional Baltic birch construction with wear-resistant polymer coating.
Four full length pieces of fly-track (two per side) and two five point, pull back�
pieces on the rear of the cabinet.
Very High Definition audio reproduction.
139 dB sustained output, 142dB peak.
Controlled wide dispersion 80� x 40� Mid / High horn.
New state of the art 3” (76mm) Nitride Titanium diaphragm compression�
driver with complex geometry phase plug and neodymium magnetic structure for�
higher output, exceptionally low distortion and extended frequency response.
Two 8” Trans-Coil midrange drivers, with a 3” (76mm) voice coil and neodymium�
magnet for increased control and output with reduced distortion and weight.
Two horn loaded 12” mid-bass drivers with 3” (76mm) inside/outside, epoxy baked,�
high temperature voice coil assemblies and neodymium magnetic structures.
Three way active requirement - 2000W from the VHD 2000 providing 1200W for�
the 12” Low Mids, 600W for the 8” Midranges and 200W for the High Frequency.
Proprietary side and top handle design (six) for simplified handling and carrying.
High impact low friction feet, allowing lock- in to the VHD subwoofers and�
easy cabinet movement.
Front locking aluminium VHD wheel boards with wraparound hardwood bumpers.
Weather proofing option and special paint finishes available on request

System Acoustic Perfomance

Max SPL Long-term	139dB (144dB two VHD 2.0’s)
Max SPL Peak	142dB (147dB two VHD 2.0’s)
-3dB Response	100Hz – 22kHz
-10dB Response	85Hz – 30kHz
Full Range mode -3dB Response	60Hz - 22kHz
Crossover Point	100Hz, 450Hz, 2.2kHz

High Frequency Section

Acoustic Design	Horn Loaded
High Horn Coverage Horizontal / Vertical	80� x 40� / 80� x 10� (2x VHD 2.0's)
High Frequency Amplifier Requirement	200W (VHD2000 amp.)
Throat Exit Diameter / Diaphragm Size	1.4” / 3.0”
Diaphragm Material	Nitride Titanium
Magnet Type	Neodymium

Mid Range Section

Acoustic Design	Horn Loaded
Mid Horn Coverage Horizontal / Vertical	80� x 40� / 80� x 10� (2x VHD 2.0's)
Midrange Amplifier Requirement	600W (VHD2000 amp.)
Woofer Size / Voice Coil Diameter / Design	2x 8" / 3.0" / Trans Coil
Diaphragm Material	Epoxy Reinforced Cellulose
Magnet Type	Neodymium

Mid-Bass Section

Acoustic Design	Horn Loaded
Mid-bass Amplifier Requirement	1200W (VHD2000 amp.)
Woofer Size / Voice Coil Diameter / Design	2x 12" / 3" / Inside Outside
Diaphragm Material	Epoxy Reinforced Cellulose
Magnet Type	Neodymium